VoltageSensor™

The VoltageSensor™ takes the voltage readings and provides the data to the WebMeter36F™. It is essentially a Class 1 to Class 2 voltage converter unit that converts the high voltage (up to 600VAC) found in electrical breaker panels to a safe milli-volt signal. These lower voltage levels are presented to the WebMeter36F™ using a simple and easy connection via the built in RJ45 jack.

The enclosure is a flame retardant ABS enclosure with a UL94V-5VA rating. The VoltageSensor™ has UL, ULC, and IEC safety certifications for North America and Europe.

Specifications

Monitored AC Power System Types (Input)

Frequency 50-60 Hz
3 phase 4 wire 208Y/120 V
3 phase 4 wire 400Y/230 V
3 phase 4 wire 415Y/240 V
3 phase 4 wire 480Y/277 V
3 phase 4 wire 600Y/347 V
3 phase 4 wire delta 240/415/480 V
3 phase 4 wire delta 240/415/480 V
3 phase 3 wire up to 600 V
installations (no neutral)
1 phase 3 wire 120V/240V
(a.k.a. split phaseal)
1 phase 2 wire up to 347 V with
installations neutral
1 phase 2 wire 208 V (no neutral)
1 phase 2 wire 240 V (no neutral)

Input

Volts

  • 347/600 VAC Maximum
  • 4 position barrier block, 12-14 AWG

Watts

  • 2.0 W max per element at 347/600 VAC

Output

Voltage Output

  • 7 VAC RMS max (when not connected to WebMeter36F)
  • 0.3 VAC RMS max (when connected to WebMeter36F)

Current Output

  • 6 mA max per element

Connector

  • RJ45 8P8C (T-568B 3 pairs used)

Mechanical & Dimensions

Size: 18.5 cm / 7.29 in (L)
12.0 cm / 4.72 in (W)
5.72 cm / 2.25 in (H)

Safety Certifications

Safety Standards :
UL 61010-1
CAN/CSA C22.2 No. 61010-1
CE

Environmental

Operating Temp: 40C to +400C
Storage Temp: -170C to +800C
Humidity Range: 10 to 90%
non-condensing

**SUBJECT TO CHANGE WITHOUT NOTICE**